Key Features & Functions
Mechanical System：Divided into structural frame and core mechanism. The structural frame carries directional read/write devices; the core includes solenoid, mainboard, mounting frame, drive shaft, gate arm, dust/waterproof cover, and guardrail.
Electronic Control System：Comprises card reader, main control board, limit switch, transformer, battery, solenoid, and relay.
Card Reader (customer-supplied)：Reads card data, processes the information, and sends a pass request signal (switch signal) to the main control board.
Working Principle:
1) Power on — system enters operational state after 3 seconds.
2) When the card reader reads a valid card, the buzzer sounds a pleasant tone to indicate successful reading. The card data is processed and a pass request signal is sent to the main control board.
3) The main control board receives the pass request, processes it comprehensively, sends a valid control signal to the motor, which runs and opens the gate arm. The limit switch controls the motor rotation angle. (In normally-open mode, the motor does not actuate.)
Technical Specifications
| Enclosure Dimensions | 1,400(D) × 1,400(W) × 2,200(H) mm |
| Arm Length | 600 mm |
| Weight | Approx. 120 kg / unit |
| Arm Rotation Angle | 90° |
| Rotation Direction | Unidirectional or bidirectional |
| Power Supply | AC 220V ± 10%, 50 Hz |
| Drive Mechanism | DC Solenoid 24V / 30W |
| Input Interface | Relay switch signal or RS485 level signal |
| Throughput Speed | Approx. 40 persons/min (normally open); 25–30 persons/min (normally closed) |
| Gate Open / Close Time | 1–2 seconds |
| Enclosure Material | National Standard SUS304 stainless steel frame |
| Operating Environment | Indoor / Outdoor (with rain canopy) |
| Service Life | 5,000,000 cycles |
| Temperature Range | –30°C to +80°C |
| Humidity Range | 5% – 90% RH |